Les meilleurs exemples SQL

SQL signifie langage de requête structuré. Il est utilisé avec toutes sortes de bases de données relationnelles.

Exemple de syntaxe SQL de base

Ce guide fournit une description de base de haut niveau de la syntaxe des instructions SQL.

SQL est une norme internationale (ISO), mais vous trouverez de nombreuses différences entre les implémentations. Ce guide utilise MySQL comme exemple. Si vous utilisez l'un des nombreux autres gestionnaires de bases de données relationnelles (SGBD), vous devrez consulter le manuel de ce SGBD si nécessaire.

Ce que nous allons couvrir

  • Utiliser (définit la base de données que l'instruction utilisera)
  • Clauses Select et From
  • Clause Where (et / ou, IN, Between, LIKE)
  • Trier par (ASC, DESC)
  • Grouper par et avoir

Comment l'utiliser

Ceci est utilisé pour sélectionner la base de données contenant les tables de vos instructions SQL:

use fcc_sql_guides_database; -- select the guide sample database 

Clauses Select et From

La partie Sélectionner est normalement utilisée pour déterminer les colonnes des données que vous souhaitez afficher dans les résultats. Il existe également des options que vous pouvez utiliser pour afficher des données qui ne sont pas une colonne de table.

Cet exemple montre deux colonnes sélectionnées dans le tableau «étudiant» et deux colonnes calculées. La première des colonnes calculées est un nombre sans signification, et l'autre est la date système.

 select studentID, FullName, 3+2 as five, now() as currentDate from student; 
image-1

syntaxe01.JPG767 × 241

Clause Where (et / ou, IN, Between et LIKE)

La clause WHERE est utilisée pour limiter le nombre de lignes renvoyées.

Dans ce cas, tous les cinq d'entre eux seront utilisés est une clause Where quelque peu ridicule.

Comparez ce résultat à l'instruction SQL ci-dessus pour suivre cette logique.

Des lignes seront présentées qui:

  • Avoir une carte d'étudiant entre 1 et 5 (inclus)
  • ou studentID = 8
  • ou avoir «Maxmimo» dans le nom

L'exemple suivant est similaire, mais il précise en outre que si l'un des élèves a certains scores SAT (1000, 1400), il ne sera pas présenté:

 select studentID, FullName, sat_score, recordUpdated from student where ( studentID between 1 and 5 or studentID = 8 or FullName like '%Maximo%' ) and sat_score NOT in (1000, 1400); 
image-1

Trier par (ASC, DESC)

Order By nous donne un moyen de trier l'ensemble de résultats par un ou plusieurs des éléments de la section SELECT. Voici la même liste que ci-dessus, mais triée par nom complet des élèves. L'ordre de tri par défaut est croissant (ASC), mais pour trier dans l'ordre opposé (décroissant), vous utilisez DESC, comme dans l'exemple ci-dessous:

 select studentID, FullName, sat_score from student where (studentID between 1 and 5 -- inclusive or studentID = 8 or FullName like '%Maximo%') and sat_score NOT in (1000, 1400) order by FullName DESC; 
image-1

Grouper par et avoir

Group By nous donne un moyen de combiner des lignes et d'agréger des données. La clause Have est similaire à la clause Where ci-dessus, sauf qu'elle agit sur les données groupées.

Ces données proviennent des données sur les contributions à la campagne que nous utilisons dans certains de ces guides.

Cette instruction SQL répond à la question: «Quels candidats ont reçu le plus grand nombre de contributions (pas un montant en $, mais un compte (*)) en 2016, mais uniquement ceux qui ont eu plus de 80 contributions?»

Le classement de cet ensemble de données dans un ordre décroissant (DESC) place les candidats ayant le plus grand nombre de contributions en haut de la liste.

 select Candidate, Election_year, sum(Total_$), count(*) from combined_party_data where Election_year = 2016 group by Candidate, Election_year having count(*) > 80 order by count(*) DESC; 
image-1

Comme pour toutes ces choses SQL, il y en a BEAUCOUP PLUS à leur sujet que ce qui est dans ce guide d'introduction. J'espère que cela vous en donne au moins assez pour commencer. Veuillez consulter le manuel de votre gestionnaire de base de données et amusez-vous à essayer différentes options vous-même.

Questions d'entrevue SQL courantes

Qu'est-ce qu'une jointure interne dans SQL?

Il s'agit du type de jointure par défaut si aucune jointure n'est spécifiée. Il renvoie toutes les lignes dans lesquelles il y a au moins une correspondance dans les deux tables.

SELECT * FROM A x JOIN B y ON y.aId = x.Id 

Qu'est-ce qu'une jointure gauche dans SQL?

A left join returns all rows from the left table, and the matched rows from the right table. Rows in the left table will be returned even if there was no match in the right table. The rows from the left table with no match in the right table will have null for right table values.

SELECT * FROM A x LEFT JOIN B y ON y.aId = x.Id 

What is a right join in SQL?

A right join returns all rows from the right table, and the matched rows from the left table. Opposite of a left join, this will return all rows from the right table even where there is no match in the left table. Rows in the right table that have no match in the left table will have null values for left table columns.

SELECT * FROM A x RIGHT JOIN B y ON y.aId = x.Id 

What is a full join in SQL?

A full join returns all rows for which there is a match in either of the tables. So if there are rows in the left table that do not have matches in the right table, those will be included. As well as if there are rows in the right table that do not have matches in the left table, those will be included.

SELECT Customers.CustomerName, Orders.OrderID FROM Customers FULL OUTER JOIN Orders ON Customers.CustomerID=Orders.CustomerID ORDER BY Customers.CustomerName 

What is the result of the following command?

 DROP VIEW view_name 

Here it’ll be an error because we can’t perform a DML operation on a view.

Can we perform a rollback after using ALTER command?

No, because ALTER is a DDL command and Oracle server performs an automatic COMMIT when the DDL statements are executed.

Which is the only constraint that enforces rules at column level?

NOT NULL is the only constraint that works at the column level.

What are the pseudocolumns in SQL? Give some examples?

A pseudocolumn is a function which returns a system generated value. The reason it is known as so because a pseudocolumn is an Oracle assigned value used in the same context as an Oracle database column but not stored on disk.

 ROWNUM, ROWID, USER, CURRVAL, NEXTVAL etc. 

Create a user my723acct with password kmd26pt. Use the user data and temporary data tablespaces provided by PO8 and provide to this user 10M of storage space in user data and 5M of storage space in temporary_data.

 CREATE USER my723acct IDENTIFIED BY kmd26pt DEFAULT TABLESPACE user_data TEMPORARY TABLESPACE temporary_data QUOTA 10M on user_data QUOTA 5M on temporary_data 

Create the role role tables and_views.

 CREATE ROLE role_tables_and_views 

Grant to the role of the previous question the privileges to connect to the database and the privileges to create tables and views.

The privilege to connect to the database is CREATE SESSION The privilege to create table is CREATE TABLE The privilege to create view is CREATE VIEW

 GRANT Create session, create table, create view TO role_tables_and_views 

Grant the previous role in the question to the users anny and rita

 GRANT role_tables_and_views TO anny, rita 

Create a user my723acct with password kmd26pt. Use the user data and temporary data tablespaces provided by PO8 and provide to this user 10M of storage space in user data and 5M of storage space in temporary_data.

 CREATE USER my723acct IDENTIFIED BY kmd26pt DEFAULT TABLESPACE user_data TEMPORARY TABLESPACE temporary_data QUOTA 10M on user_data QUOTA 5M on temporary_data 

Create the role role tables and_views.

 CREATE ROLE role_tables_and_views 

Grant to the role of the previous question the privileges to connect to the database and the privileges to create tables and views.

The privilege to connect to the database is CREATE SESSION The privilege to create table is CREATE TABLE The privilege to create view is CREATE VIEW.

 GRANT Create session, create table, create view TO role_tables_and_views 

Grant the previous role in the question to the users anny and rita

 GRANT role_tables_and_views TO anny, rita 

Write a command to change the password of the user rita from abcd to dfgh

 ALTER USER rita IDENTIFIED BY dfgh 

The users rita and anny do not have SELECT privileges on the table INVENTORY that was created by SCOTT. Write a command to allow SCOTT to grant the users SELECT priviliges on these tables.

 GRANT select ON inventory TO rita, anny 

User rita has been transferred and no longer needs the privilege that was granted to her through the role role tables and_views. Write a command to remove her from her previous given priviliges except that she still could connect to the database.

 REVOKE select ON scott.inventory FROM rita REVOKE create table, create view FROM rita 

The user rita who was transferred is now moving to another company. Since the objects that she created is of no longer use, write a commmand to remove this user and all her objects.

Here CASCADE option is necessary to remove all the objects of the user in the database.

 DROP USER rita CASCADE ### User rita has been transferred and no longer needs the privilege that was granted to her through the role role_tables_and_views. Write a command to remove her from her previous given priviliges except that she still could connect to the database. ``` sql REVOKE select ON scott.inventory FROM rita REVOKE create table, create view FROM rita 

The user rita who was transferred is now moving to another company. Since the objects that she created is of no longer use, write a command to remove this user and all her objects.

Here CASCADE option is necessary to remove all the objects of the user in the database.

 DROP USER rita CASCADE 

Write SQL query to find the nth highest salary from table.

 SELECT TOP 1 Salary FROM ( SELECT DISTINCT TOP N Salary FROM Employee ORDER BY Salary DESC ) ORDER BY Salary ASC

SQL Create View Statement

What is a View?

A View is a database object that presents data existing in one or more tables. Views are used in a similar way to tables, but they don’t contain any data. They just “point” to the data that exists elsewhere (tables or views, for example).

Why do we like them?

  • Views are a way to limit the data presented. For example, the human resources department data filtered to only present non-sensitve information. Sensitive information in this case could be social security numbers, sex of employee, payrate, home address, etc.
  • Complex data across more than one table can be combined into a single “view.” This can make life easier for your business analysts and programmers.

Important Safety Tips

  • Views are managed by the system. When data in the related tables are changed, added, or updated, the View is updated by the system. We want to use these only when needed to manage use of system resources.
  • In MySQL, changes to the table design (that is, new or dropped columns) made AFTER a view is created are not updated in the view itself. The view would have to be updated or recreated.
  • Views are one of the four standard database object types. The others are tables, stored procedures, and functions.
  • Views can usually be treated as you would a table, but updates are limited or not available when the view contains more than one table.
  • There are many other details about views that are beyond the scope of this introductory guide. Spend time with your database managers manual and have fun with this powerful SQL object.

Syntax of the Create View Statement (MySQL)

CREATE [OR REPLACE] [ALGORITHM = UNDEFINED ] [DEFINER =  user ] [SQL SECURITY  DEFINER ] VIEW view_name [(column_list)] AS select_statement [WITH [CASCADED | LOCAL] CHECK OPTION] 

This guide will cover this part of of the statement…

CREATE VIEW view_name [(column_list)] AS select_statement 

Sample View creation from the student tables

Notes:

  • The name of the view has a “v” at the end. It’s recommended that the view name indicate that it’s a view in some way to make life easier for programmers and database administrators. Your IT shop should have its own rules on naming objects.
  • The columns in the view are limited by the SELECT and the rows of data by the WHERE clause.
  • the ”`” character around the view names is required because of the ”-” in the names. MySQL reports an error without them.
create view `programming-students-v` as select FullName, programOfStudy from student where programOfStudy = 'Programming'; select * from `programming-students-v`; 

Sample of using a View to combine data from more than one table

A Student demographics table was added to the database to demonstrate this usage. This view will combine these tables.

Notes:

  • To “join” tables, the tables must have fields in common (usually primary keys) that uniquely identity each row. In this case it’s the student ID. (More on this in the SQL Joins guide.)
  • Notice the “alias” given to each table (“s” for student and “sc” for student contact). This is a tool to shorten the table names and make it easier to identify which table is being used. It’s easier than typing long table names repeatedly. In this example, it was required because studentID is the same column name in both tables, and the system would present an “ambiguous column name error” without specifying which table to use.

Guide to the SQL Between Operator

The BETWEEN Operator is useful because of the SQL Query Optimizer. Although BETWEEN is functionally the same as: x <= element <= y, the SQL Query Optimizer will recognize this command faster, and has optimized code for running it.

This operator is used in a WHERE clause or in a GROUP BY HAVING clause.

Rows are selected that have a value greater than the minimum value and less than the maximum value.

It’s important to keep in mind that the values entered in the command are excluded from the result. We get just what is between them.

Here is the syntax for using the function in a WHERE Clause:

select field1, testField from table1 where testField between min and max 

Here is an example using the student table and the WHERE clause:

-- no WHERE clause select studentID, FullName, studentID from student; -- WHERE clause with between select studentID, FullName, studentID from student where studentID between 2 and 7; 
image-1

Here is an example using the campaign funds table and the having clause. This will return rows where the sum of the donations for a candidate are between $3 Million and $18 Million based on the HAVING clause in the GROUP BY part of the statement. More on aggregation in that guide.

select Candidate, Office_Sought, Election_Year, format(sum(Total_$),2) from combined_party_data where Election_Year = 2016 group by Candidate, Office_Sought, Election_Year having sum(Total_$) between 3000000 and 18000000 order by sum(Total_$) desc; 
image-1

SQL Create Table Statement Example

A table is a group of data stored in a database.

To create a table in a database you use the CREATE TABLE statement. You give a name to the table and a list of columns with its datatypes.

CREATE TABLE TABLENAME(Attribute1 Datatype, Attribute2 Datatype,........); 

Here’s an example creating a table named Person:

CREATE TABLE Person( Id int not null, Name varchar not null, DateOfBirth date not null, Gender bit not null, PRIMARY KEY( Id ) ); 

In the example above, each Person has a Name, a Date of Birth and a Gender. The Id column is the key that identifies one person in the table. You use the keyword PRIMARY KEY to configure one or more columns as a primary key.

A column can be not null or null indicating whether it is mandatory or not.

A guide to the SQL Insert Query

Insert queries are a way to insert data into a table. Let’s say we have created a table using

CREATE TABLE example_table ( name varchar(255), age int)

example_table

Name|Age --- | --- 

Now to add some data to this table , we’ll use  INSERT  in the following way:

INSERT INTO example_table (column1,column2) VALUES ("Andrew",23)

example_table

Name|Age --- | --- Andrew|23

Even the following will work, but it’s always a good practice to specify which data is going into which column.

INSERT INTO table_name VALUES ("John", 28)

example_table

Name|Age --- | --- Andrew|23 John|28

A guide to the SQL AND operator

AND is used in a WHERE clause or a GROUP BY HAVING clause to limit the rows returned from the executed statement. Use AND when it’s required to have more than one condition met.

We’ll use the student table to present examples.

Here’s the student table without a WHERE clause:

select * from student; 
image-1

and_operator01.JPG?raw=true760×247

Now the WHERE clause is added to display only programming students:

select * from student where programOfStudy = 'Programming'; 
image-1

and_operator02.JPG?raw=true790×179

Now the WHERE clause is updated with AND to show results for programming students that also have a SAT score greater than 800:

select * from student where programOfStudy = 'Programming' and sat_score > 800; 
image-1

and_operator03.JPG?raw=true790×179

This is a more complex example from the campaign contributions table. This example has a GROUP BY clause with HAVING clause using an AND to restrict the returned records to candidates from 2016 with contributions between $3 Million and $18 Million in total.

select Candidate, Office_Sought, Election_Year, FORMAT(sum(Total_$),2) from combined_party_data where Office_Sought = 'PRESIDENT / VICE PRESIDENT' group by Candidate, Office_Sought, Election_Year having Election_Year = 2016 and sum(Total_$) between 3000000 and 18000000 order by sum(Total_$) desc; 
image-1

How to use the SQL Order By Keyword

Order By (ASC, DESC)

ORDER BY gives us a way to SORT the result set by one or more of the items in the SELECT section. Here is an SQL sorting the students by FullName in descending order. The default sort order is ascending (ASC) but to sort in the opposite order (descending) you use DESC.

SELECT studentID, FullName, sat_score FROM student ORDER BY FullName DESC; 
+-----------+------------------------+-----------+ | studentID | FullName | sat_score | +-----------+------------------------+-----------+ | 2 | Teri Gutierrez | 800 | | 3 | Spencer Pautier | 1000 | | 6 | Sophie Freeman | 1200 | | 9 | Raymond F. Boyce | 2400 | | 1 | Monique Davis | 400 | | 4 | Louis Ramsey | 1200 | | 7 | Edgar Frank "Ted" Codd | 2400 | | 8 | Donald D. Chamberlin | 2400 | | 5 | Alvin Greene | 1200 | +-----------+------------------------+-----------+ 9 rows in set (0.00 sec) 

Here is the UN-ORDERED, current, full student list to compare to the above.

SELECT studentID, FullName, sat_score, rcd_updated FROM student; 
+-----------+------------------------+-----------+---------------------+ | studentID | FullName | sat_score | rcd_updated | +-----------+------------------------+-----------+---------------------+ | 1 | Monique Davis | 400 | 2017-08-16 15:34:50 | | 2 | Teri Gutierrez | 800 | 2017-08-16 15:34:50 | | 3 | Spencer Pautier | 1000 | 2017-08-16 15:34:50 | | 4 | Louis Ramsey | 1200 | 2017-08-16 15:34:50 | | 5 | Alvin Greene | 1200 | 2017-08-16 15:34:50 | | 6 | Sophie Freeman | 1200 | 2017-08-16 15:34:50 | | 7 | Edgar Frank "Ted" Codd | 2400 | 2017-08-16 15:35:33 | | 8 | Donald D. Chamberlin | 2400 | 2017-08-16 15:35:33 | | 9 | Raymond F. Boyce | 2400 | 2017-08-16 15:35:33 | +-----------+------------------------+-----------+---------------------+ 9 rows in set (0.00 sec) 

As with all of these SQL things there is MUCH MORE to them than what’s in this introductory guide.

I hope this at least gives you enough to get started.

Veuillez consulter le manuel de votre gestionnaire de base de données et amusez-vous à essayer différentes options vous-même.